Chip deflection cone and curtain

Description:

Designed to spread cuttings away from the collar of the hole while drilling, the deflector curtain 
will redirect the angle of upcoming cuttings. 
Producing a cleaner collar and reduce the amount of fall back and regrind. This increases bit life, 
dependency on water and reduces the amount of dust created. Similar in purpose to the deflector 
cone, the deflector curtain is more effective during angled drilling than the cone. Easy to replace 
with a simple chain mounting system. Can be made to any size and colour.

The idea is to produce a significantly cleaner collar and reduce the amount of fall back and 
regrind.  This increases bit life, dependency on water and reduces the amount of dust created. 
The deflector cones are made from a cut and tear resistant polyurethane that firmly seals around 
the drill rod. The cuttings being bailed out of the blast hole hit the cone and bounce off at an 
angle away from the hole. Made to order,cone size and cone angle