Car park lighting design and supply
A badly lit car park means glare in drivers' eyes, black spots between bays and neighbours complaining about light in their bedrooms. ALL LED Direct designs and supplies car park lighting for Australian sites: shopping centres, offices, industrial estates, schools, clubs, councils and body corporates.
We can do the lot (layout, LED fittings and poles) or just the part you need, with installation by your electrician or integrator. We do the DALI programming and commissioning remotely.
Designing to AS/NZS 1158.3.1
Outdoor car parks in Australia are usually designed to AS/NZS 1158.3.1, the standard for pedestrian area (Category P) lighting. It covers outdoor off-road car parks, including rooftops, and sorts them into subcategories PC1, PC2 and PC3 based on how busy they are at night and the level of concern about crime. Accessible parking (PCD) and areas where pedestrians cross the circulation roadways (PCX) are treated separately.
Your council, DA or tenancy requirements often name the subcategory already, so include it if you have it. If not, we'll recommend one for you or your consultant to confirm. Covered and multi-storey car parks are generally treated as interior spaces, so tell us if any part is undercover.
Our lighting design pack sets out the layout, luminaire schedule and assumptions so your electrician or certifier can check it before anything goes up. It's design-assist work: a competent person must verify and certify the final design.
Poles and fittings
Most open car parks are lit from poles. We supply stainless steel, galvanised and painted poles made to order by our local manufacturing partner, with the height and outreach matched to the fitting and layout, plus rag bolts if you need them. See lighting poles.
For roads, parks and shared paths on the same job, see council and streetscape lighting.
On top, car parks usually run LED area or street-style fittings, with floodlights where you need to cover more ground from fewer positions or from a building edge. Browse street and area lights and LED floodlights. Our own-range fittings are made to order with our manufacturing partners and quoted for the job.
Street and area fittings from our range. Product photos, not site photos. Quoted per site.
Already got poles? If they're sound, we can often reuse them and swap the old heads for LED. Photos and the pole height are usually enough to check what fits.
Spill, glare and neighbours
If your approval mentions spill limits, curfews or neighbour complaints, put it in the brief and we'll design around it from the start.
Controls and running costs
Photocells, timers, motion sensors or a lighting control system mean the car park isn't burning full power at 3 am when nobody's there. If you want dimming, check it with the designer first so your subcategory's minimum levels are still met. For buildings already on DALI, see DALI lighting control.
Upgrade savings are worked out from your existing wattage, number of fittings and run hours, not a headline percentage.
Supply only or design and supply
- Supply only: we design (if you need it) and supply the fittings and poles, and your electrical contractor installs.
- Design and supply: one package, layout to fittings and poles. Installation is by your electrician or integrator. We do the DALI programming and commissioning remotely.
If a council or government brief asks for Indigenous supplier participation, mention it in your email.
What helps us quote
Talk to us at info@alledirect.com. Any of this helps:
- Site address and a site plan or aerial screenshot with the car park marked
- Rough number of bays, plus any accessible bays and pedestrian crossings
- The AS/NZS 1158.3.1 subcategory, if your approval or consultant has named one
- Existing poles (height, spacing, condition) or "new poles needed"
- Power available, and when the lights should run
- Any neighbour, spill or curfew conditions
- Supply only or design and supply, plus your timing
Pricing is by quote.
FAQs
What standard applies to car park lighting in Australia?
Outdoor car parks are usually designed to AS/NZS 1158.3.1 (pedestrian area, Category P, lighting), which sets subcategories by night-time activity and concern about crime. Accessible parking and pedestrian crossings are treated separately. Covered car parks are generally treated as interior spaces.
Do you supply car park light poles?
Yes. Stainless steel, galvanised and painted poles made to order by our local manufacturing partner, with rag bolts and matching LED fittings if you want them.
Can you design the car park lighting layout?
Yes. Our lighting design pack covers the layout, luminaire schedule and assumptions. A competent person must verify and certify the final design.
Do you install car park lighting?
No. We design and supply, with installation by your electrician or integrator. We handle the DALI programming and commissioning remotely.
Send an enquiry
Tell us what you're lighting. Plans, photos or a rough brief are all fine. It comes straight to info@alledirect.com.


