SILVER ZINC All In 1 AEROSOL 400g Black Zinc

Black Zinc is a fast drying epoxy based black zinc coating which provides excellent adhesion, corrosion resistance and long lasting durability to metal surfaces. It can be used as an anti-corrosive primer and top coat in a one-step application. It can also be used as a touch up coating for welded areas on galvanised products, however for longer term protection and highly corrosive conditions Grey Zinc is recommended before the application of Black Zinc as a finish coat.
Fast drying
Satin Black Finish
Excellent Adhesion
Corrosion Resistant
Long lasting durability
Protect-Match-Seal
Industrial strength
Suitable Surface
Steel, wrought iron, galvanised iron and non-ferrous metals such as; aluminium, alloys, Zincalume® and stainless steel with appropriate primer.
Ideal Application Temperature
Between 10°C and 40°C. Avoid use in windy conditions.
Preparation
Surface should be clean, dry and free from contaminants such as rust, oil, grease, dirt and salt. Welds should be ground back to clean white metal. Thoroughly sand new metal and lightly sand previously painted surfaces to ensure maximum adhesion. Remove loose rust and flaking paint with a wire brush, scraper or mechanical sander. For best results, always remove rust back to bare metal. For superior protection and adhesion on mild steel surfaces and welds it is recommended to prime with G r e y Z i n c and allowing it to dry for 4-6 hours before applying 2 coats of Black Zinc. For non-ferrous metals such as aluminium, alloys, Zincalume® and stainless steel use Grey Zinc.
Application
Before spraying, cover surrounding areas to protect from overspray. Shake can for at least 45 seconds AFTER the mixing ball begins to rattle. Shake can occasionally during use. Hold can upright approximately 20-25cm from the surface. Spray with a smooth sweeping motion. To prevent paint from sagging, apply several light mist coats rather than one heavy coat. Adjust nozzle to achieve desired spray pattern. Use h

Attributes:

Brand: Silver Zinc
Part Number: A1020
Sub Category: Zinc Spray
Freight Levy: Freight Free on ALL LED DIRECT Couriers for orders over $500
Weight (kg): 0.4000
Length (mm): 70
Height (mm): 70
Width (mm): 270
Length Packaging (mm): 70
Height Packaging (mm): 70
Width Packaging (mm): 275
Barcode: 9345917000028
Barcode (Secondary): 9345917000646

Warranty Information:

Warranty Method
Return to ALL LED DIRECT
Commercial Use
1 Year
Domestic Use
1 Year
Warranty Period
1 Year

Shipping Information:

Freight Levy: Freight Free on ALL LED DIRECT Couriers for orders over $500