Ozuno
RAPIX DALI-2 Two Channel Relay, 16 A (DGOZ-RLY-16A-02)
RAPIX DALI-2 Two Channel Relay, 16 A (DGOZ-RLY-16A-02)
Price and freight are quoted on request for this item.
Couldn't load pickup availability
A DALI-2 two channel relay for on/off switching of up to 16 A of lighting load per channel, using DALI commands on a connected DALI line. The on-board 240 V ac rated relay on each channel can switch a full 16 A of LED, fluorescent, incandescent and HID lighting loads, for commercial and industrial buildings. The unit has a large area for terminating 1.5 mm² or 2.5 mm² double insulated cables (ac supply, switched load and DALI line).
Features
- General purpose load switching (on and off) from received DALI commands.
- Switches 16 AX at 240 V ac.
- Very high inrush current rating: 500 A (2 ms) on each channel.
- Large neutral and earth termination bars.
- Suits mounting in a ceiling void; DIN rail mounting with the optional DIN rail mounting bracket (not included).
- Fits through a 90 mm downlight hole.
- LED indicators (DALI and power).
- Each channel uses a single DALI short address and can be included in up to 16 DALI groups and/or up to 16 DALI scenes.
- Configured with RAPIX Addressing or RAPIX Integrator software, or other DALI commissioning software that supports DALI Device Type 7.
- Complies with IEC 62386 Ed 2 and Device Type 7 (switching function), with the full set of optional Device Type 7 relay threshold functions.
Specifications
| Order code | DGOZ-RLY-16A-02 |
| Switched outputs | 2 |
| DALI compatibility | DALI and DALI-2 |
| DALI operating voltage | 16 V dc nominal, operation from 9.5 V to 22.5 V |
| DALI line current draw | 2 mA |
| DALI mains tolerance | DALI input is mains voltage tolerant |
| DALI device type | Type 7, optional threshold switching functions fully implemented |
| Power source | ac mains |
| Nominal mains supply voltage | 100 to 240 V ac |
| Mains frequency | 47 to 63 Hz |
| Electrical isolation | 4 kV (DALI to mains) |
| Status indicators | Power: red on. DALI: green on |
| Load rating | ac loads (resistive, inductive, fluorescent, LED, capacitive): 16 A per channel. Motor: 2 A (1 hp) per channel |
| Inrush current rating | 500 A (2 ms) |
| Relay switch operations | More than 50,000 at rated load |
| Relay contact type | Bifurcated high inrush |
| Standby power | Less than 150 mW |
| Mains terminals | 2 x 2.5 mm² maximum per terminal or 3 x 1.5 mm² maximum per terminal |
| DALI terminals | 2 x 2.5 mm² maximum per terminal or 3 x 1.5 mm² maximum per terminal |
| Operating temperature | 0 to 50 °C |
| Operating humidity | 0% to 95% RH non-condensing |
| Ingress protection | IP20 |
| Mounting | Surface mount via 6 mm mounting holes; DIN rail with the optional DIN rail mounting bracket |
| Housing | Flame retardant polycarbonate, UL 94V-0 |
| Weight | 175 g |
| DALI standards | IEC 62386-101 Ed 2, IEC 62386-102 Ed 2, IEC 62386-208 (Device Type 7) |
| Wireless | None (no WiFi, Bluetooth, NFC, Zigbee or Thread) |
Warranty: 2 years against manufacturing defects (manufacturer warranty, as stated in the Ozuno data sheet).
Data sheet: RAPIX DALI-2 Relay data sheet, Rev 5 (PDF)
Quote only. Pricing is not shown online. Use the Request for quote button, email info@alledirect.com or call 0400 384 233, and we will come back to you with a quote.
