Ozuno
RAPIX DALI-2 One Channel DIN Relay, 12 A (DGOZ-DINRLY-12A-01)
RAPIX DALI-2 One Channel DIN Relay, 12 A (DGOZ-DINRLY-12A-01)
Price and freight are quoted on request for this item.
Couldn't load pickup availability
A DALI-2 one channel DIN mount relay for on/off switching of loads up to 12 A via DALI commands on a connected DALI line. Each relay channel can switch 12 A of LED, fluorescent, incandescent and HID lighting loads at 100 to 240 V ac. Cable termination uses rising cage clamp screw terminals, suitable for 1.5 mm² or 2.5 mm² cables (ac supply, switched load and DALI line).
Features
- General purpose load switching (on and off) from received DALI commands.
- Switches 12 AX at 240 V ac.
- Very high inrush current rating: 500 A (2 ms).
- LED indicators (DALI, power, and one for each load channel).
- Each channel uses a single DALI short address and can be included in up to 16 DALI groups and/or up to 16 DALI scenes.
- Configured with RAPIX Addressing or RAPIX Integrator software, or other DALI commissioning software that supports DALI Device Type 7.
- Complies with DALI-2 standard IEC 62386 and Device Type 7 (switching function).
Compatible loads
LED lamps and drivers, electronic transformers, standard and toroidal iron-core transformers, incandescent and CFLs: 100 to 240 V ac, up to 12 A per channel. Motors, including exhaust fans and ceiling fans: 100 to 240 V ac, up to 2 A (1 hp).
Safety notes (from the data sheet)
- The relay contacts are voltage-free and have basic insulation from mains voltages. The voltage-free switching terminals are not suitable for connection to a Safety Extra Low Voltage (SELV) system.
- Supply and load must be on the same phase. The 2-channel relay is not suitable where each channel switches a different phase.
Specifications
| Order code | DGOZ-DINRLY-12A-01 |
| Switched outputs | 1 |
| DALI compatibility | DALI and DALI-2 |
| DALI operating voltage | 16 V dc nominal, operation from 9.5 V to 22.5 V |
| DALI line current draw | 2 mA |
| DALI mains tolerance | DALI input is mains voltage tolerant |
| DALI device type | Type 7 |
| Power source | ac mains |
| Nominal mains supply voltage | 100 to 240 V ac |
| Mains frequency | 47 to 63 Hz |
| Electrical isolation | 2 kV (channel input/output terminals to DALI and to mains) |
| Status indicators | Power and DALI: green. Each channel: green |
| Load rating | ac loads (resistive, inductive, fluorescent, LED, capacitive): 12 A per channel. Motor: 2 A (1 hp) per channel |
| Inrush current rating | 500 A (2 ms) |
| Relay switch operations | More than 50,000 at rated load |
| Relay contact type | Bifurcated high inrush |
| Relay terminal polarity | Non-polarised |
| Standby power | Less than 150 mW |
| Mains terminals | 2 x 2.5 mm² maximum per terminal or 3 x 1.5 mm² maximum per terminal |
| DALI terminals | 2 x 2.5 mm² maximum per terminal or 3 x 1.5 mm² maximum per terminal |
| Operating temperature | 0 to 50 °C |
| Operating humidity | 0% to 95% RH non-condensing |
| Ingress protection | IP20 |
| Materials | Enclosure/fascia: flame resistant polycarbonate. DIN rail clip: ABS |
| Weight | 105 g |
| DALI standards | IEC 62386-101 Ed 2, IEC 62386-102 Ed 2, IEC 62386-208 Ed 1 (switching function) |
| Wireless | None (no WiFi, Bluetooth, NFC, Zigbee or Thread) |
Warranty: 2 years against manufacturing defects (manufacturer warranty, as stated in the Ozuno data sheet).
Data sheet: RAPIX DALI-2 DIN Relays data sheet, Revision 3 (PDF)
Quote only. Pricing is not shown online. Use the Request for quote button or email info@alledirect.com, and we will come back to you with a quote.
