Ozuno
RAPIX DALI-2 DIN Blind and Shutter Relay (DGOZ-DINBSR-01)
RAPIX DALI-2 DIN Blind and Shutter Relay (DGOZ-DINBSR-01)
Price and freight are quoted on request for this item.
Couldn't load pickup availability
A DIN mounted DALI-2 relay for the control of ac and dc motors commonly used for curtains, blinds, shutters and tilting shading systems. It can be used in any DALI system. Operations include manual control (up/open, down/close and stop), and commissioning options allow proportional control, for example the amount open or the tilt angle. Hardware interlocks ensure only one of the up/open or down/close outputs can be active at any time. It needs no external power supply: it is powered from the DALI line.
Features
- Suits blind, shutter, curtain and tilt motors, ac or dc (see ratings).
- LED indicators (DALI and output on).
- Button control: up/open, down/close and stop.
- Proportional control of amount open or tilt angle in 1% increments.
- DALI commands for stepping up/open or down/close in 10% steps.
- DALI scenes can be used for amount-open presets.
- Configured with RAPIX Addressing or RAPIX Integrator software, or other DALI commissioning software that supports DALI Device Type 7.
- Complies with DALI-2 standard IEC 62386 and Device Type 7 (switching function).
- Rising cage clamp screw terminals for 1.5 mm² or 2.5 mm² cables.
Safety notes and incompatible motors (from the data sheet)
- Limit switches must be present for all blind, shutter, gate, door and shading system types.
- For dc motors the relay reverses the polarity. At either limit, the motor must be able to reverse direction when power is applied with reverse polarity.
- Not suitable for motors that use a wireless remote control with the receiver built into the tubular motor, or for dc motors that include batteries.
Specifications
| Order code | DGOZ-DINBSR-01 |
| DALI compliance | DALI and DALI-2 |
| DALI operating voltage | 16 V dc nominal, operation from 9.5 V to 22.5 V |
| DALI line current draw | 4 mA peak, 2 mA average |
| DALI mains tolerance | DALI input is mains voltage tolerant |
| DALI device type | Type 7 |
| Power source | DALI line |
| Electrical isolation | 4 kV (input/output terminals to DALI) |
| Status indicators | DALI present and identification: green. Output energised (motor running): green |
| Rating, ac motors | 100 to 240 V ac, 50/60 Hz: 2 A (1 hp) |
| Rating, dc motors | 12 to 24 V dc: 2 A |
| Relay switch operations | More than 10,000 at maximum rated load |
| Start-up time | 15 seconds from DALI power application |
| Standby power | 25 mW |
| DALI failure behaviour | Motor is de-energised when DALI power is removed |
| Motor and power terminals | 2 x 2.5 mm² maximum per terminal or 3 x 1.5 mm² maximum per terminal |
| DALI terminals | 2 x 2.5 mm² maximum per terminal or 3 x 1.5 mm² maximum per terminal |
| Operating temperature | 0 to 50 °C |
| Operating humidity | 0% to 95% RH non-condensing |
| Ingress protection | IP20 |
| Materials | Enclosure/fascia: flame resistant polycarbonate. DIN rail clip: ABS |
| Weight | 150 g |
| DALI standards | IEC 62386-101 Ed 2, IEC 62386-102 Ed 2, IEC 62386-208 (switching function) |
| Wireless | None (no WiFi, Bluetooth, NFC, Zigbee or Thread) |
Warranty: 2 years against manufacturing defects (manufacturer warranty, as stated in the Ozuno data sheet).
Data sheet: RAPIX DALI-2 DIN Blind/Shutter Relay data sheet, Revision 2 (PDF)
Quote only. Pricing is not shown online. Use the Request for quote button, email info@alledirect.com or call 0400 384 233, and we will come back to you with a quote.
