Ozuno
RAPIX DALI-2 Adaptive Phase Dimmer, 400 W (DGOZ-DM-400W-01)
RAPIX DALI-2 Adaptive Phase Dimmer, 400 W (DGOZ-DM-400W-01)
Couldn't load pickup availability
Need a quote, bulk price or freight to site? Email info@alledirect.com
A DALI-2 adaptive phase dimmer for dimming mains phase dimmable loads. DALI commands are mapped to phase angle dimming. It has a large area for terminating 1.5 mm² or 2.5 mm² double insulated cables for the ac mains supply, the phase dimmed load and the DALI line. DALI-2 compliant to IEC 62386 (Ed 2). Not suitable for ceiling sweep fans, exhaust fans or any motor loads.
Features
- Phase dimming of lighting loads from received DALI commands.
- Nominal 400 W of lighting load, including most LED lighting loads (see load table).
- DALI line powered: draws under 6 mA from the DALI line (3 mA DALI line current draw in the specifications).
- Two wire dimming device: no neutral required, only the 220 to 240 V ac line (active) and load wiring is used.
- Suits mounting in a ceiling void, or on DIN rail with the optional DIN rail mounting bracket (not included).
- The dimmed load has a DALI short address and can be included in up to 16 DALI groups and/or up to 16 DALI scenes.
- Configured with RAPIX Addressing or RAPIX Integrator software, or other DALI commissioning software that supports DALI Device Type 4.
- Complies with IEC 62386 (Ed 2) and Device Type 4. Works in DALI and DALI-2 systems.
- Needs both ac mains power and a DALI line powered by a DALI power supply that meets DALI standards.
Compatible loads (rated at 50 °C maximum ambient)
| Dimmable LED lamps and drivers | 400 W (the LED driver must be dimmable) |
| Electronic transformers | 400 W |
| Standard iron-core transformers | 250 W |
| Toroidal iron-core transformers | 300 W |
| Incandescent | 350 W |
| Dimmable CFLs | 400 W |
| Not compatible | Ceiling sweep fans, exhaust fans, any other motor loads |
Rated for operation up to 50 °C ambient. A higher LED load rating is possible at lower ambient temperatures; see the derating graph in the data sheet.
Specifications
| Order code | DGOZ-DM-400W-01 |
| Outputs | 1 |
| Mains supply input voltage | 220 to 240 V ac nominal |
| Mains frequency | 47 to 53 Hz |
| Electrical isolation | 4 kV (DALI to mains) |
| Brightness control range | 0.1% to 100% (minimum level may vary with load type) |
| Minimum load | 1 W |
| Mains standby power | Less than 100 mW |
| Mains terminals | 2 x 2.5 mm² maximum per terminal or 3 x 1.5 mm² maximum per terminal |
| DALI terminals | 2 x 2.5 mm² maximum per terminal or 3 x 1.5 mm² maximum per terminal |
| Operating temperature | 0 to 50 °C (for full performance, see derating) |
| Operating humidity | 0% to 95% RH non-condensing |
| IP rating | IP20 |
| Housing | Flame retardant polycarbonate |
| Mounting | Surface mount via 6 mm mounting holes; DIN rail with the optional DIN rail mounting bracket |
| Weight | 100 g |
| Compatibility | DALI-2 certified, for DALI and DALI-2 systems |
| Maximum units on one DALI line | 64 |
| DALI line current draw | 3 mA |
| DALI device type | Type 4 |
| DALI standards | IEC 62386-101 Ed 2, IEC 62386-102 Ed 2, IEC 62386-205 Ed 1 |
| Wireless | None (no WiFi, Bluetooth, NFC, Zigbee or Thread) |
Warranty: 2 years against manufacturing defects (manufacturer warranty, as stated in the Ozuno data sheet).
Data sheet: RAPIX DALI-2 Adaptive Phase Dimmer data sheet, Rev 6 (PDF)
Lead time: 1 to 2 weeks. This item is ordered in.
Pricing shown. Order online with Add to cart. For project quantities or questions, email info@alledirect.com or call 0400 384 233.
