Molex 61mm Splice Protector

Splice protectors are reinforced by a stainless steel pin to BS2056 302 S26 specification, thus ensuring the maximum possible protection for the delicate fusion splices. To install, simply slide the protector over the fiber prior to splicing. After completion of the splice, heat shrink it into position to give permanent protection to the splice area.

• Steel pin reinforcement
• 2.4mm outside diameter
• color : Transparent

Warranty Information (From Install)

• Commercial Use 1 Year
• Domestic Use 1 Year
• Warranty Method Return to All Led Direct
• Warranty Period 1 Year

Attributes

• Brand Molex
• Part Number -KFR-00009
• Also Known As splice protectors

Shipping Information

• Freight Levy Freight Free on LED Couriers for orders over $500
• Weight (kg) 0.0005
• Length Packaging (mm) 60
• Height Packaging (mm) 2
• Width Packaging (mm) 3
• Barcode 2000100830581

Disclaimer

• Installation Requirements for Specific Products By purchasing items such as sharp tools, knives, or paint, you confirm that you have read and understood our Terms and Conditions regarding the proper installation of these products.
• All items that require electrical installation must be installed by a licensed electrician. You agree to comply with this requirement and ensure that such installations are carried out by qualified professionals.
• You must be over the age of 18 to purchase any sharp objects, knives, or items that may pose a safety risk. This is to ensure that you can legally and responsibly handle such products.