Brooks Mains Powered Radio Link Base for 140 Series Alarms

Brooks Mains Powered Radio Link Base for 140 Series Alarms

The EIB168RF RadioLINK Base transmits a Radio Frequency (RF) alarm signal when the unit attached to it senses fire. When it receives an RF alarm signal from another EIB168RF Base, the attached smoke or heat alarm will sound. It therefore eliminates the need to run long interconnect wires between all the smoke alarms on different floors and in different rooms.

It is designed for use with the EasiFit range of Mains Powered Smoke/Heat Alarms. The RadioLINK Base itself, is also mains powered and has rechargeable Lithium cells for back-up in the event of mains failure. The RadioLINK Base will normally be wired to the nearest mains circuit in the ceiling (usually the lighting circuit). The Smoke/Heat Alarm is then slid on to the RadioLINK Base rather than to its normal mounting plate. As many as 30 units can be interconnected in this way.

Warranty Information (From Install)

• Commercial Use 5 Years
• Domestic Use 5 Years
• Warranty Method Return to All Led Direct
• Warranty Period 5 Years

Attributes

• Brand Brooks
• Part Number - EIB168RC

Shipping Information

• Weight (kg) 0.2340
• Length Packaging (mm) 152
• Height Packaging (mm) 42
• Width Packaging (mm) 155
• Barcode 2000100207239
• Barcode (Secondary) 9317537000559

Disclaimer

• Installation Requirements for Specific Products By purchasing items such as sharp tools, knives, or paint, you confirm that you have read and understood our Terms and Conditions regarding the proper installation of these products.
• All items that require electrical installation must be installed by a licensed electrician. You agree to comply with this requirement and ensure that such installations are carried out by qualified professionals.
• You must be over the age of 18 to purchase any sharp objects, knives, or items that may pose a safety risk. This is to ensure that you can legally and responsibly handle such products.