IP IP66 Enclosures 400mm W x 600mm H x 250mm D Galvanised Steel IP66 Enclosure Grey

"

IP Enclosures S1 Range of steel electrical enclosures are suitable for general industrial applications.

Protection: Complies with IP66 IK10, NEMA 4. (Independent accredited test laboratory)

Standard: IEC/EN/AS62208, IEC/EN/AS60529, (IEC/EN/AS61439 Compliant)

Material:

- Body: 1.2-1.5mm galvanised steel sheet

- Gland Plate: 1.5mm galvanised steel sheet

- Door: 1.5mm galvanised steel sheet

- Device Mounting Plate: 1.5mm galvanised steel sheet

- Seal: Polyurethane

Body: The robust monoblock body is fabricated using galvanised steel sheet (1.2mm-1.5mm). Flat face sealing surfaces are provided to increase seal life. Pre-fitted blind nutserts are incorporated to accommodate mounts and accessory fasteners to eliminate drilling and retain IP rating. Integral device plate mounts and M6 earth stud is provided.

Single Door: The robust surface mounted door is fabricated using 1.5mm galvanised steel sheet and incorporates concealed removable hinges with captive pins. The door is designed for a 110 opening. Each door contains integral cable management rail studs, M6 earth stud.

Seal: A high quality machine-applied full perimeter Polyurethane seal foamed in place (FIP) provides excellent sealing over a long life.

Lock: Steel 3mm double bit insert quarter turn lock & key.

Device Mounting Plate: The device mounting plate is fabricated using 1.5mm galvanised steel sheet, pressed to provide additional strength and supplied pre-fitted into enclosure as standard.

Gland Plate: Gland plates are provided with gaskets and fasteners.

Surface Treatment: UL approved epoxy polyester powder-coated with a textured finish. 80-120 micron average thickness. Colour RAL7035

"

Warranty Information (From Install)

Attributes

Shipping Information

Disclaimer

• Installation Requirements for Specific Products By purchasing items such as sharp tools, knives, or paint, you confirm that you have read and understood our Terms and Conditions regarding the proper installation of these products.
• All items that require electrical installation must be installed by a licensed electrician. You agree to comply with this requirement and ensure that such installations are carried out by qualified professionals.
• You must be over the age of 18 to purchase any sharp objects, knives, or items that may pose a safety risk. This is to ensure that you can legally and responsibly handle such products.